English 5Network Control Displays That Appear While ConnectedMessages appear on the screen for a short period to indicate control switching and network connection status.1. When control is switched to a computerWhen the web browser is started and the specified procedureis followed, operation switches to the computer and“NETWORK CONTROL” appears on the main unit on-screendisplay. (This appears even if on-screen display has been setto “OFF”.)2. When control is switched to the main unitWhen you click the S button at the computer, theconnection is canceled and control is switched to the mainunit, and the main unit on-screen display changes from“NETWORK CONTROL” to “DISCONNECTED”.Once the switching is complete, any main unit buttonoperation will cause the “DISCONNECTED” display todisappear.3. When the connection is forcibly canceled from themain unitPressing the [EXIT/OSD] button on the main unit for twoseconds or more will forcibly cancel the connection and causethe “NETWORK CONTROL” display to disappear.No connections will be received by the computer for 10seconds after the connection has been forcibly canceled.1. When disconnected from the network2. If the DVR is accessed while the connection isdisabled3. When you try to access a DVR that already has fourcomputers connected* The above screen display examples are those for the DSR-3009model.Main unit displayIf the network control has been set to “ ON(DISPLAY: OFF)” using the digital video recordermenu, the “ NETWORK CONTROL” message will notbe displayed. (The digital video recorder will alwaysdisplay live images regardless of networkoperations.)Computer display