Sanyo DSR-3016P Manual For Remote Operation

Also see for DSR-3009P: Manual Instruction manual

Sanyo DSR-3016P Manual For Remote Operation Manual pdf 10 page image

English 9Menu Setting ProceduresWhen more than one camera is connected to the digital video recorder, the camera rate (unique recrate for each camera) can be set separately for each camera. In addition, you can make up to fourprograms that include settings such as the method of combining the images from each recordingcamera and individual camera rates. You can specify the appropriate program when making [TIMERSET] and [RECORDING MODE SET] menu settings.1 Use the menu (1) to specify a program number.P-1 to P-42 Use the menu (2) to specify the cameras thatare to be used for recording from the numbers ofthe connected cameras that are being displayedon the screen (DSR-3009 model: 1-9; DSR-3016model: 1-16), and set the camera rate for eachcamera selected.• If a camera is not to be recorded: Select “OFF”.• If a camera is to be recorded: Set the camera rate.Default settingDSR-3009 model: 0.463 FPSDSR-3016 model: 0.26 FPSThe camera rate values that appear in the menulists will vary depending on the number ofchannels connected. The maximum value for RECRATE in PROGRAM REC mode is 25 fps, so thevalues in the table will be this maximum valuedivided by the number of channels, and comprisesthe upper limit for the setting.3 Click [SAVE] to complete the setting.When the setting is completed, the available time fornormal recording and the number of alarm recordings thatare possible under the conditions that have been set will bedisplayed for reference (3).4 You can repeat the above procedure to programup to a maximum of four different patterns.Screen example for DSR-3009 modelScreen example for DSR-3016 model3. PROGRAM REC SET123123