32INTRODUCTION OPERATION SETTINGS OTHER OTHER OTHER OTHER4 DISPLAY/BUZZER SETYou can erase the date, time or other information from theoperation display area of the playback screen. This sub-menu also lets you set a warning buzzer to sound foralarms or when the hard disk space reaches zero. You canset items to “OFF” as needed.[Settings] ( indicates initial setting.) setting items(1)(2)(3)(4)(5)(6)(7)(8)(9)(1)(2) (4)(3)Item Setting Description(1) DATE/TIME ON Display date/time in operating display area.OFF Don’t display date/time in operating display area.(2) QUALITY/AUDIO ON Display picture quality and “A” (audio recording) in operation display area.OFF Don’t display picuture quality or “A” (audio recording) in operation display area.(3) DVR NAMEON Display name set for digital video recorder. OFF Don’t display name set for digital video recorder.(4) ALARM COUNT ON Display current alarm count in operating display area.OFF Don’t display current alarm count in operating display area.(5) ALARM ON ON Sound buzzer when alarm is received.OFF Don’t sound buzzer when alarm is received.(6) DISK FULL ON When “OVER WRITE” is not set, sound buzzer when remaining hard disk space reaches zero.OFF When “OVER WRITE” is not set, don’t sound buzzer when remaining hard disk space reaches zero.(7) KEY INON Sound buzzer when operation button is pressed. OFF Don’t sound buzzer when operation button is pressed.(8) WARNING ON The buzzer sounds in the following cases: Hard disk drive error. Fan error. Recording error. No inputsignal (camera image interrupted) when VIDEO LOSS is ON.OFF Don’t sound buzzer in the following cases: Hard disk drive error. Fan error. Recording error. No inputsignal (camera image interrupted) when VIDEO LOSS is ON.(9) NON RECON Sound buzzer when recording stops, or when recording is intentionally stopped without releasing the lock. OFF Don’t sound buzzer when recording stops.e_dsr_m800.book Page 32 Friday, January 31, 2003 5:45 PM
