Sanyo DSR-M800 Instruction Manual

Contents

Sanyo DSR-M800 Instruction Manual Manual pdf 41 page image

40INTRODUCTION OPERATION SETTINGS OTHER OTHER OTHER OTHER8 MENU UPLOAD/DOWNLOADYou can save menu setting values onto a CompactFlashcard. This sub-menu also lets you read menu setting valuessaved on CompactFlash cards.z If “COPY MIRRORING SETTINGS” is set to “YES”, thehard disk may be initialized. If you don't want to initializethe hard disk, select “NO”.z Do not turn the power OFF when saving/loading menuitems to/from a CompactFlash card.z Confirm that the light on the CompactFlash card reader islit before using the card reader with the USB terminal. Ifused before the light is lit, SAVE and LOAD may not berecognized.z When the menu cannot be saved to the CompactFlashcard consecutively, remove the CompactFlash card,reinsert and try again.z At least 2 KB of available memory space is needed onthe CompactFlash card.z The file name is “M800MENU.txt”.You will need a CompactFlash card reader andCompactFlash card (commercially available).1 Press the [MENU] button.The [MENU] button lights, and the

screenappears.2 Select “8. MENU UPLOAD/DOWNLOAD”, and press the [ ]button.The screen appears.The cursor is positioned on “SAVE MENUS TO CF”.The following two procedures describe the “SAVE MENUSTO CF” and “LOAD MENUS FROM CF” items.ALARMREC/STOPLOCK/REMOTEUSBPOWERSEARCHMENU RESETMENU REVIEW CUE EXIT/OSDPLAY/STOPSTILLTIMERFULLLAN(LINK/ACT.)

[ ] button[MENU] button [ ] button[ ] button [EXIT/OSD] button[ ] buttonCompactFlashcard readerCompactFlashcardSettingse_dsr_m800.book Page 40 Friday, January 31, 2003 5:45 PM