Sanyo EM-N107WS Supplement Of Service Manual

Also see for EM-N107BS: Service manual

CAUTIONCAUTIONCAUTIONCAUTIONCAUTIONWWWWWARNING TO SERARNING TO SERARNING TO SERARNING TO SERARNING TO SERVICE TECHNICIANSVICE TECHNICIANSVICE TECHNICIANSVICE TECHNICIANSVICE TECHNICIANSPRECAUTIONS TO BE OBSERVED BEFORE AND DURINGSERVICING TO AVOID POSSIBLE EXPOSURE TOEXCESSIVE MICROWAVE ENERGY(a) Do not operate or allow the oven to be operated with the door open.(b) Make the following safety checks on all ovens to be serviced before activating the magnetron or othermicrowave source, and make repairs as necessary :(1) Interlock operation, (2) proper door closing, (3) seal and sealing surfaces (arcing, wear, and other damage),(4) damage to or loosening of hinges and latches, (5) evidence of dropping or abuse.(c) Before turning on microwave power for any service test or inspection within the microwave generatingcompartments, check the magnetron, wave guide or transmission line, and cavity for proper alignment, integrity,and connections.(d) Any defective or misadjusted components in the interlock, monitor, door seal, and microwave generation andtransmission systems shall be repaired, replaced, or adjusted by procedures described in this manual beforethe oven is released to the owner.(e) A microwave leakage check to verify compliance with the Federal performance standard should be performedon each oven prior to release to the owner.REFERENCE NO. SM-860236SERSERSERSERSERVICE MANUALVICE MANUALVICE MANUALVICE MANUALVICE MANUAL MicrMicrMicrMicrMicrowave Ovenowave Ovenowave Ovenowave Ovenowave Oven EM-P410WSEM-P410WSEM-P410WSEM-P410WSEM-P410WS (U.S.A.)(U.S.A.)(U.S.A.)(U.S.A.)(U.S.A.)PrPrPrPrProduct Code No.oduct Code No.oduct Code No.oduct Code No.oduct Code No. 437 450 34437 450 34437 450 34437 450 34437 450 34File No :File No :File No :File No :File No :