Sanyo FXD-780GD Operating Instructions Manual

Also see for FXD-780GD: Service manual

Contents

Sanyo FXD-780GD Operating Instructions Manual Manual pdf 18 page image

17ELECTRICAL CONNECTIONSWIRING(White)(White/Black)(Gray)(Gray/Black)(Green)(Green/Black)(Violet(Violet/Black)LeftSpeakerRightSpeakerDo NotConnectFront LeftSpeakerFront RightSpeakerRear LeftSpeakerRear RightSpeaker(White)(White/Black)(Gray)(Gray/Black)(Green)(Green/Black)(Violet(Violet/Black) Do NotConnect2-speaker System4-speaker System+12V Constant Power Supply (Yellow)+12V Accessory/Switched (Red)Ground Wire (Black)Power Antenna/Amplifier Turn On (Blue)ANTENNA PLUGANTENNA SOCKETIn the case of a 2-speaker system,tape the ends of unconnectedterminals to prevent short circuitCAUTION• DO NOT connect any speaker wires to the metal body or chassis of the vehicle.• DO NOT connect the speaker common (–) wires to each other.• Connect each speaker wire directly to each speaker terminal.• All speaker common (–) wires must remain floating.1 Antenna socket• Insert the plug from the antenna installed in your vehicle into this socket. (If your vehicle has a dualantenna system, a dual antenna to single antenna cable adaptor may be required.)2 + 12V Constant Power Supply (Yellow)• Connect this wire to the +12V power terminal which receives power continuously.3 +12V Accessory/Switched (Red)• Connect this wire to the terminal which receives power while the ignition switch is ON or in the ACCES-SORY position.• If the ignition switch does not have on ACC position, connect this wire to a +12V power terminal whichreceives power continuously. (Same as item 2.)4 Ground wire (Black)• Connect this wire to the vehicle chassis.5 Power Antenna/Amplifier Turn On (Blue)• Connect this wire to the control terminal of a Power Antenna or an external amplifier.• When not using a Power Antenna or an external amplifier, this wire is not connected.

/ 20

Related manuals for Sanyo FXD-780GD