Sanyo FXD-780GD Operating Instructions Manual

Also see for FXD-780GD: Service manual

Contents

Sanyo FXD-780GD Operating Instructions Manual Manual pdf 8 page image

7ADJUSTING THE SOUND STAGE .............................6You can adjust the position of sound stage to best serve a particular seat.TO MEMORY THE SOUND STAGE ................................................... 61. Adjust the BALANCE or FADER.2. Press the appropriate Preset buttons 6 for more than 2 seconds. The Audio position indicator blinksand adjusted sound stage is stored.TO CALL THE SOUND STAGE ......................................................... 6Press the appropriate Preset buttons 6 to call the desired sound stage during the BALANCE or FADERadjustment mode. The Preset buttons are factory-set to the following conditions.BALANCE FADERP 1 1 : For the left seat ( L 0 R 2 ) ( R 4 F 0 )P 2 2 : For the front seat ( L 0 R 0 ) ( R 4 F 0 )P 3 3 : For the right seat ( L 2 R 0 ) ( R 4 F 0 )P 4 4/SHF : For the rear seat ( L 0 R 0 ) ( R 0 F 4 )P 5 5/RPT : For all the seat ( L 0 R 0 ) ( R 0 F 0 )Each time you press the preset buttons in the BALANCE or FADER adjustment mode, the audio positionindicator changes as follows ;1 2 3 4/SHF 5/RPTSWITCHING THE DISPLAY ........................................3Each time you press the DISP button 3, the display window will change as shown below ;• Radio modeFrequency and Clock• CD modeElapsed track time and ClockIGNITION-OFF CLOCK RECALL .............................3Press the DISP button 3 while the ignition switch is in the “OFF” position.The display will illuminate showing the time and then automatically shut off after 5 seconds.