Sanyo FXD-MP690 Operating Instructions Manual

Also see for FXD-MP690: Service manual

Sanyo FXD-MP690 Operating Instructions Manual Manual pdf 10 page image

CD OPERATION814 5 6 7 2 3LOADING AND EJECTING THE CD…………………1,8Insert a disc into the CD slot 1 and the CD player will start.The system remains in CD mode and “ ” appears in the display.Press the eject button 8 to eject a disc.SWITCHING TO CD MODE............................…..........2Press the SOURCE button 2 with the power on to switch from radio mode or AUX mode to CDmode.When the CD mode is switched on while a disc is loaded, play resumes from the point at whichplay was stopped.When the entire disc has played, the unit returns to the first track and play resumes.SKIPPING TRACKS ...............................................…3Press the TUN/SEK/TRK button to skip to the beginning of the next track.Press the TUN/SEK/TRK button to skip to the beginning of the previous track.Press and hold the TUN/SEK/TRK or TUN/TRK 3 for several seconds to search quickly(with sound) in the forward or reverse direction.When the button is released, the CD resumes normal play.Notes:• You can play CD-Rs or CD-RWs (rewritable CDs) on this unit in proper condition.• Some CD-Rs/CD-RWs (depending on the equipment used for its recording or thecondition of the disc) may not play on this unit.• You cannot play CD-R/ CD-RW that is not finalized. (A finalize process necessary for arecorded CD-R disc to be played on the audio CD player.)PLACING THE CD IN PAUSE MODE ........................ 4While playing a CD, press the PAU button 4.To resume playing, press the PAU button 4 again.10