Sanyo FXD-MP690 Operating Instructions Manual
Also see for FXD-MP690: Service manual
                      | |
Contents
| 
RADIO OPERATION1 35 4267SWITCHING TO RADIO MODE…………………….…1Press SOURCE button 1 to select radio mode, the radio mode appears in the display togetherwith the memory band and frequency.SELECTING THE FREQUENCY BAND……………..2At radio mode, press BAND/LOUD button 2 shortly to select the desired band.The reception band will change in the following order:FM1 FM2 FM3 MW LWRADIO TUNING…………………………………………3Press the TUN/SEK/TRK or button 3 shortly to activate automatic seek function. Pressfor several seconds until “MANUAL” appears on the display, the manual tuning mode is selected.If both buttons have not pressed for several seconds, they will return to seek tuning mode and“AUTO” appeared on the display.AUTOMATIC MEMORYSTORING & PROGRAM SCANNING…………………4- Automatic memory storingPress AS/PS button 4 for several seconds, the radio searches for 6 strongest stations andstores them into the presets of the currently selected band. While searching, ”LOC” appearson the display.- Program scanningPress AS/PS button 4 shortly to scan preset station. When the field strength level is morethan the threshold level of stop level, the radio is holding at that preset number for severalseconds with release mute, then searches again.8 |
Related manuals for Sanyo FXD-MP690
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine