Sanyo HT27546 Owner's Manual

Also see for DS24425: Owner's manual Owner's manual Service manual

Contents

10 Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032ANALOG AV CONNECTIONSUSING THE BACK VIDEO AND AUDIOINPUT JACKS TO CONNECT A VCR(OR OTHER ANALOG DEVICE)Switch off DTV and external equipment before connect-ing cables. (Cables are not supplied.)BACK VIEWOF VCRDTV VIDEO2AV INPUTJACKS1 Connect VCR’s Audio Video Out to the DTV’sVIDEO2 Video In jacks.NOTE: For Mono VCR (Single Audio Jack), connect VCRAudio Out to DTV Audio (L) Input.22 OptionalConnect VCR’s S-Video Out to the DTV’s S-Video InJack.NOTE: S-Video jack connection overrides Video jack con-nection (VIDEO2).3 Press POWER to turn on the DTV, then turn onexternal equipment.4 Press INPUT to select Video2 toview the VCR program.What you will need for connections:Audio Video Cable – 1S-Video Cable – 1S-VIDEOJACK22114 5 62 3POWERINPUTREMOTE CONTROL4 32 “No Signal” will appear randomly on the screen when no signal isdetected at the VIDEO2 input jack. Press the INPUT key after connecting cables to access the AVinputs. There is NO need to tune to a blank channel. Position your DTV at least 2 feet from stereo speakers. The magnetsin the speakers may affect the picture quality.CONNECTING ANALOG AUDIO OUTJACKS TO A STEREO AMPLIFIERSwitch off DTV and external equipment before connect-ing cables. (Cables are not supplied.)STEREO AMPLIFIERBACK VIEWOF DTV1 Connect the DTV Audio Out (L/R) to the StereoAmplifier In (L/R).2 Press POWER to turn on the DTV, then turn onexternal equipment.NOTE:Do not connect external speakers directly to the DTV.114 5 62 3POWERINPUTREMOTE CONTROL2IMPORTANT NOTE FOR MONITOR USE:If you did not connect an antenna, youmust run AllChannel Search twice before you can select the AV inputs.