Sanyo HT27546 Owner's Manual

Also see for DS24425: Owner's manual Owner's manual Service manual

Contents

DIGITAL AV CONNECTIONS9Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-50321 Connect DVD Player or similar digital equipment’sComponent Video Out to the DTV’s ComponentVideo Input jacks.2 Connect DVD Player or similar digital equipment’sAudio Out to the TV’s Audio Input jacks.3 Press POWER to turn on the TV, then turn onexternal equipment.4 Press INPUT to select Component2 to view theDVD program.USING COMPONENT JACKS TOCONNECT A DVD PLAYER OR OTHERDIGITAL EQUIPMENTThe Component Video jacks will accept any videocontent.Switch off DTV and external equipment before connect-ing cables. (Cables are not supplied.) Follow these stepsto easily connect your STB or DVD Player to this DTV:DVD PLAYER(or similardigital devicesuch as aSatelliteReceiver.)COMPONENTJACKS 1What you will needfor connections:Component Video Cable – 1Audio Cable – 1 Press the INPUT key after connecting the cables, to select theCom-ponent2 input signal. There is NO need to tune to a blank channel.“No Signal” will appear randomly on the screen when no signal isdetected at the VIDEO2 (Y, Pb, Pr) inputs. Position your DTV at least 2 feet from stereo speakers. The magnetsin the speakers may affect the picture quality.2CONNECTING DIGITAL AUDIO OUTJACK TO A MULTI-CHANNELRECEIVERDolby ® Digital Audio provides 5.1 channels of surroundsound (five full-range channels [5] and one low-frequencyeffect channel [.1]). A fiber optics cable is used to carrythe 5.1 surround sound (for low-noise signal transfer).BACK VIEWOF DTVOPTICALDIGITAL CABLE1 Using a Fiber Optics cable, connect the DTV’s DigitalAudio Output to the Digital Audio Input of a Multi-Channel Receiver. (Fiber optics cable is not supplied.)2 Press POWER to turn on the DTV, then turn onexternal equipment.NOTES:When making the connection, do not pinch or kink the fiberoptics cable.Red light visible at the Digital Audio Output does not nec-essarily indicate that Dolby ® Digital 5.1 audio is available.Digital audio is made up of light pulses that the human eyecannot detect. Dolby ® Digital 5.1 audio is available at theDigital Audio Output only when received as part of a Digitalsignal.What you will need forconnections:Optical Cable – 1MULTI-CHANNELRECEIVER114 5 62 3POWERINPUTREMOTE CONTROL4 314 5 62 3POWERINPUTREMOTE CONTROL2IMPORTANT NOTE FOR MONITOR USE:If you did not connect an antenna, youmust run AllChannel Search twice before you can select the AV inputs.DTVBACKIMPORTANT NOTE:These jacks acceptonly 480i (standardintelaced) signals.