Sanyo LCD-24XAZ10F Instruction Manual

Also see for LCD-24XAZ10F: Service manual

Memorizing the Channels & Setting ChannelsAuto Channel Scan When you turn on the TV for the first time, you should perform an autochannel scan to set up stations on your TV.Note: Be sure to select the TV input source before operation.96.75MHzExitChannel ScanTotal Channel 4To auto scan for channels:1 Press MENU. The on-screen menu opens.Press 6or 5to display CHANNEL menu, then press ENTER.2Press 6or 5to highlight Auto Scan, then press ENTER.The TV begins scanning for available channels in your area and storesthem into memory. This may take several minutes, please wait.During the process, you may press EXIT to stop the auto scan, butyou will need to run the auto scan again to set up stations on your TV.4Manual Channel Scan If desired programs can not be searched by Auto Scan, you can make useof Manual Scan to search programs manually.To manual scan for channels:23 Press 6or 5to highlight Manual Scan, then press ENTER.4 Press3to scan towards lower frequency, press4to scan towardshigher frequency. If the program found is not the one you desire, press3/4until you get the desired program, then this program is storedin the current channel position.565.75MHzExitAdjustManual ScanCurrent Channel 21 Use channel select buttons to select a current position number.Go to CHANNEL menu.To exit, press EXIT button.Sound SystemAuto ScanChannel EditManual ScanColor System AUTOBGCHANNELMove Enter ReturnCountry OthersSound SystemAuto ScanChannel EditManual ScanColor System AUTOBGCHANNELMove Enter ReturnCountry OthersSound SystemAuto ScanChannel EditManual ScanColor System AUTOBGCHANNELMove Enter ReturnCountry OthersPress 6or 5to highlight Country, then press 4, use 6or 5toselect your local area and then press ENTER. If no choice meets,please select Others.1435 To exit, press EXIT button.