Sanyo LCD-40XZ10F Service Manual

Also see for LCD-40XZ10F: Instruction manual

Stepped-gain PGA with 25 dB tuning range and 1 dB tuning resolutionMaximum IF gain of 37 dBProgrammable TOP to accommodate different tuner gain to optimize noise and linearityperformanceDVI/HDCP/HDMI Compliant Input PortThree DVI/HDCP/HDMI input ports support up to 225MHz @ 1080P 60Hz with 12-bitdeep-color resolutionSingle link on-chip DVI 1.0 compliant receiverHigh-bandwidth Digital Content Protection (HDCP) 1.1 compliant receiverHigh Definition Multimedia Interface (HDMI) 1.3 compliant receiver with CEC (ConsumerElectronics Control) supportLong-cable tolerant robust receivingHigh-Performance Scaling EngineFully Programmable shrink/zoom capabilitiesNonlinear video scaling supports variousmodes including PanoramaAuto-Configuration/Auto-DetectionAuto input signal format and mode detectionAuto-tuning function including phasing, positioning, offset, gain, and jitter detectionSync Detection for H/V SyncVideo Processing & Conversion3-D motion adaptive video de-interlacers with edge-oriented adaptive algorithm forsmooth low-angle edgesAutomatic 3:2 pull-down & 2:2 pull-down detection and recoveryMStar 3rd Generation Advanced Color Engine (MStarACE-3) automatic pictureenhancement gives:Brilliant and fresh colorIntensified contrast and detailsVivid skin toneSharp edgeEnhanced depth of field perceptionAccurate and independent color controlsRGB compliance allows end-user to experience the same colors as viewed on CRTs andother displays10-bit internal data processingProgrammable 12-bit RGB gamma CLUT3-D video noise reductionMPEG artifact removal including de-blocking and mosquito noise reductionFrame rate conversionMFC (Motion Frame Conversion) supports:Judder-free motion videoOutput frame rate 50/60/100/120 f/secUp to 60Hz full HD or 120Hz HD panelsOutput Interface