Sanyo PLC-EF30 Service Manual

Also see for PLC-EF30: Owner's manual Specifications

-11-Remove 12 screws and then pull the optical unit upward andremove.NOTE :Be careful of the attachment direction of Fan.FN902 is Fan for an exhaust. *1. Remove 3 screws A and remove the assembly motor & audio2. Remove 4 screws B and remove the power holder.3. Remove 4 screws C and remove the power holder top.4. Remove 6 screws D and remove the assembly sub power.5. Remove 4 screws E and remove the Fan (FN902).6. Pull the assembly power upward and remove.7. Pull the assembly PFC upward and remove.5. Assembly Motor & audio, assembly Power, assemblyPFC, assembly Sub power and Fan(FN902)Removal.6. Optical unit removal.BBA AABBCCCCDDDDDDEEEEPower holderpower holder topAss'y Motor & audioAss'y Sub-powerAss'yPFCAss'ypowerFN902The direction of a wind. *Optical unitFN902 :See the Production changenotice of the cover. (Page-1)