Sanyo PLC-HF15000L Service Manual

Also see for QuaDrive PLC-HF15000L: Brochure & specs Owner's manual Owner's manual Manual Manual

Contents

-1-Lens Mounting- 7 -Some parts are not used for installation or replacement. Keep these parts for later use.Note: Figures in this manual may differ from the actual product.FOCUS CORRECTIONBE SURE TO CHECK FOR SAFETYAfter installing or replacing the lens, be sure to check the following for safety.1. Check the lens is securely fixed with the screws.2. Check no wiring is damaged or tangled on the gear of the lens motor or the othermechanical parts.3. Check no part is missing, and no mounting part is loose.When the lens is attached to the projector and imagesare being projected onto the screen, the peripheralfocus may be out of focus in some localized areas. Ifthis happens, insert the one, of three sizes of spacers,in between the Lens Attachment and the lens to adjustthe focus.Inserting the Spacer corrects the distance on the LensAdjustment and improves the diagonal focus.The corrected distance is determined by the thicknessof the used spacers. As a guide, the distance isadjusted by approximately 30 mm for each 0.1-mmthickness of the spacers.There are three types of spacers provided, and thereare four of each spacer type. Use these spacers tocorrect the distance as required.Spacer "1"Color; ClearThickness; 0.1 mmSpacer "2"Color; BlackThickness; 0.2 mmSpacer "3"Color; CreamThickness; 0.3 mmCorrection distance30 mm/for 60-inchprojectionCorrection distance60 mm/for 60-inchprojectionCorrection distance90 mm/for 60-inchprojection60-inch projectionScreenABCDB'A'D'C'DistanceLensLens AttachmentSpacer- 8 -NOTE: Following table shows approximate measurement. Actual measurement depends on lens and projectors.SPECIFICATIONS (Throw distance and screen size, lens shift ratio) for PLC-HF15000LLENS SHIFT (UP/DOWN)H2H1H2H1LENS SHIFT (SIDE TO SIDE)W2 W1 W2W1LeftmostUppermost Downmost RightmostSCREEN SIZE (INCH) AND THROW DISTANCE (m) LENS SHIFT/CENTER RATIOPart No. Zoom 40 60 80 100 120 150 180 200 250 300 350 400 500 600 U/D (MAX) SIDE(MAX)H1 H2 W1 W2LNS-W01Z NONE 1.0 1.6 2.1 2.7 3.2 4.0 4.9 5.4 6.8 8.1 9.5 10.9 13.7 16.4 0 10 2 3LNS-W02Z TELE 1.6 2.4 3.3 4.1 4.9 6.2 7.4 8.3 10.3 12.4 14.5 16.6 20.8 24.9 0 10 2 3WIDE 1.2 1.8 2.5 3.1 3.8 4.7 5.7 6.3 7.9 9.5 11.1 12.7 15.9 19.1LNS-W03LNS-W03E NONE 0.7 1.0 1.4 1.8 2.1 2.7 3.3 3.6 4.5 5.5 6.4 7.3 9.2 11.0 1 1 1 1LNS-W04 TELE 1.7 2.7 3.6 4.5 5.5 6.8 8.2 9.2 11.5 13.8 16.1 18.5 23.1 27.7 0 10 2 3WIDE 1.3 2.0 2.7 3.4 4.1 5.2 6.3 7.0 8.8 10.5 12.3 14.1 17.6 21.2LNS-W06 TELE 1.3 2.0 2.7 3.4 4.1 5.2 6.2 6.9 8.7 10.4 12.2 13.9 17.4 20.9 0 10 1 1WIDE 1.0 1.6 2.1 2.6 3.2 4.0 4.8 5.3 6.7 8.0 9.4 10.7 13.4 16.1LNS-S03 TELE -------- -------- -------- 7.9 9.5 11.9 14.3 15.9 19.9 23.9 27.9 32.0 40.0 48.0 0 10 2 3WIDE -------- -------- -------- 5.8 7.0 8.8 10.6 11.8 14.7 17.7 20.7 23.7 29.6 35.6LNS-S04 TELE -------- 3.4 4.6 5.8 7.0 8.7 10.5 11.7 14.7 17.6 20.6 23.5 29.5 35.4 0 10 2 3WIDE -------- 2.6 3.5 4.4 5.3 6.7 8.1 9.0 11.3 13.6 15.9 18.1 22.7 27.3LNS-M02 TELE -------- 6.0 8.1 10.2 12.3 15.5 18.6 20.7 26.0 31.2 36.5 41.7 52.2 62.7 0 10 2 3WIDE -------- 4.5 6.1 7.7 9.3 11.7 14.1 15.7 19.7 23.7 27.7 31.7 39.7 47.7LNS-T01LNS-T01Z NONE 6.1 9.2 12.3 15.4 18.5 23.2 27.8 30.9 38.7 46.4 54.1 61.9 77.4 92.9 0 10 2 3LNS-T02LNS-T02ETELE 5.6 8.4 11.1 13.8 16.6 20.6 24.7 27.5 34.3 41.1 47.9 54.8 68.4 82.0 0 10 2 3WIDE 4.1 6.1 8.0 10.0 11.9 14.8 17.7 19.7 24.5 29.4 34.3 39.1 48.9 58.6LNS-T03 TELE 8.3 12.3 16.3 20.3 24.3 30.3 36.3 40.3 50.3 60.3 70.3 80.3 100.2 120.2 0 10 2 3WIDE 5.8 8.5 11.2 13.9 16.7 20.7 24.8 27.5 34.3 41.1 47.9 54.7 68.3 81.9