38MCI MODESMARTMEDIA AND PC CARD ADAPTERSmartMedia and PC Card Adapter are provided with this LCD projector. SmartMedia can be used as a PC cardconforming to the PC Card Standard-ATA by combining with PC Card Adapter.INSTALL / REMOVE THE SMARTMEDIAINSTALLInsert SmartMedia fully into PC Card Adapter. Make sure EJECTbutton pops out.NOTE : The front side of SmartMedia has Contact Area on itssurface.The front side of PC Card Adapter has Eject button on theleft side of the slot.Do not insert SmartMedia in the reverse. The card and thedata can be damaged.REMOVETo remove SmartMedia, fully press in the EJECT button. The cardpops out, then take out the card.NOTE : Do not pull SmartMedia by force. It may damageSmartMedia or PC Card Adapter.PC Card Adapter(supplied)SmartMedia(supplied)EJECT buttonIMPORTANT NOTETHE DATA STORED ON THE MEMORY CARD (SMARTMEDIA OR PC CARD) MAY BE DAMAGED ORLOST BECAUSE OF THE DAMAGE OF THE MEMORY CARD OR THE ACCIDENTAL ERASURE. IT ISRECOMMENDED THAT ANY IMPORTANT DATA SHOULD BE COPIED ONTO SEPARATE MEDIA,SUCH AS A FLOPPY DISK, A HARD DISK, OR A MO DISK. WE SHALL NOT BE LIABLE FOR ANYDAMAGE OR LOSS OF PROFITS ARISING FROM THE LOSS OF DATA BECAUSE OF THE ACCIDEN-TAL OPERATION AND THE DAMAGE OF A MEMORY CARD OR APPLIANCES. REFER TO OWNER’SMANUAL OF MEDIA CARD IMAGER FOR OPERATING THE SOFTWARE.