Sanyo PLC-SU22N Owner's Manual

7PREPARATIONPOSITIONING THE PROJECTORl This projector is basically designed to project on a flat projection surface.l The projector can be focused from 4.6’(1.4m) ~ 35.4’(10.8m).l Refer to the figure below to adjust the screen size.H1H2300”231”200”154”150”115”100”77”40”35.4’ (10.8m)24.0’ (7.3m)18.0’ (5.5m)11.8’ (3.6m)4.6’ (1.4m)Screen Size(W x H) mmHeight (H1)30”Height (H2)610 x 45717.1”(435mm)0.9”(22mm)60”1219 x 91434.3”(870mm)1.7”(44mm)100”2032 x 152457.1”(1451mm)2.9”(73mm)150”3048 x 228685.7”(2177mm)4.3”(109mm)200”4064 x 3048114.3”(2903mm)5.7”(145mm)300”6096 x 4572171.4”(4354mm)8.6”(218mm)ROOM LIGHTThe brightness in the room has a great influence on the picture quality. It is recommended to limit ambientlighting in order to provide the best image.30”ADJUSTABLE FEETPicture tilt and projection angle can be adjusted byrotating the ADJUSTABLE FEET. Projection angle canbe adjusted to 10 degrees.Lift the front of the projector and pull the FEET LOCKLATCHES on both sides of the projector.1ADJUSTABLE FEETSETTING-UP THE PROJECTORFEET LOCKLATCHESRelease the FEET LOCK LATCHES to lock theADJUSTABLE FEET and rotate the ADJUSTABLEFEET for fine tune of the position and the tilt.2To shorten the ADJUSTABLE FEET, lift the front of theprojector and pull and undo the FEET LOCK LATCHES.The position and the keystone distortion of the imagecan be also adjusted with the Menu Operation. (Referto P 21, 29, 30 and 37.)3