Sanyo PLC-SU60 Owner's Manual Manual pdf 19 page image
Manuals database logo
manualsdatabase
Your AI-powered manual search engine

Sanyo PLC-SU60 Owner's Manual

Also see for PLC-SC10: Service manual

Page 1 previewPage 2 previewPage 3 previewPage 4 previewPage 5 previewPage 6 previewPage 7 previewPage 8 previewPage 9 previewPage 10 previewPage 11 previewPage 12 previewPage 13 previewPage 14 previewPage 15 previewPage 16 previewPage 17 previewPage 18 previewPage 19 previewPage 20 previewPage 21 previewPage 22 previewPage 23 previewPage 24 previewPage 25 previewPage 26 previewPage 27 previewPage 28 previewPage 29 previewPage 30 previewPage 31 previewPage 32 previewPage 33 previewPage 34 previewPage 35 previewPage 36 previewPage 37 previewPage 38 previewPage 39 previewPage 40 previewPage 41 previewPage 42 previewPage 43 previewPage 44 previewPage 45 previewPage 46 previewPage 47 previewPage 48 previewPage 49 previewPage 50 previewPage 51 previewPage 52 previewPage 53 previewPage 54 previewPage 55 previewPage 56 previewPage 57 previewPage 58 previewPage 59 previewPage 60 preview
Contents
  1. Table Of Contents
  2. To the Owner
  3. Safety Instructions
  4. Installing the Projector in Proper Position
  5. Compliance
  6. Connecting the AC Power Cord
  7. Features and Design
  8. Part Names and Functions
  9. Terminal
  10. Remote Control
  11. Laser Pointer Function
  12. Remote Control Code
  13. Remote Control Operating Range
  14. Installation
  15. Connecting to a Computer
  16. Connecting to Video Equipment
  17. Basic Operation
  18. Zoom Adjustment
  19. Auto Set Up Function
  20. No Show Function
  21. On-Screen Menu
  22. Menu Bar
  23. Computer Input
  24. Computer System Selection
  25. Computer Adjustment (Auto)
  26. Computer Adjustment (Manual)
  27. Image Level Selection
  28. Image Level Adjustment
  29. Screen Size Adjustment
  30. Video Input
  31. Input Source Selection (RGB Scart 21-Pin)
  32. Video System Selection
  36. Setting
  37. Maintenance and Cleaning
  38. Cleaning the Air Filters
  39. Lamp Replacement
  40. Lamp Replace Counter
  41. Appendix
  42. Indicators and Projector Condition
  43. Menu Tree
  44. Compatible Computer Specifications
  45. Technical Specifications
  46. Configurations of Terminals
  47. Optional Parts
  48. Attaching the Lens Cover
  49. USB Key Lock Function
Sanyo PLC-SU60 Owner's Manual Manual pdf 19 page image
19Basic OperationConnect the projector's AC power cord into an AC outlet. ThePOWER indicator flashes red in a moment and turns on red.Press the POWER ON-OFF button on the top control or on theremote control. The POWER indicator turns green, and thecooling fans start to operate. The preparation display appears onthe screen and the count down starts. (A captured image canbe used as the preparation display. See “Capture” on page 40.)23Press the POWER ON-OFF button on the top control or on theremote control, and a message "Power off?" appears on thescreen.Press the POWER ON-OFF button again to turn off theprojector. The POWER indicator starts to flash red, and itcontinues while the cooling fans are operating (for about 90seconds).12TO MAINTAIN THE LIFE OF LAMP, ONCE YOU TURNPROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORETURNING IT OFF.DO NOT DISCONNECT AC POWER CORD WHILECOOLING FANS ARE RUNNING OR BEFORE POWERINDICATOR LIGHTS RED. OTHERWISE IT WILL RESULTIN SHORTENING LAMP LIFE.13 When the projector has cooled down enough to be turned onagain, the POWER indicator lights red. Then you can disconnectthe AC power cord.26The preparation display disappears after 30 seconds.The message disappears after 4 seconds.4 After the count-down, the input source that was selected lastand the Lamp mode status icon appear on the screen.(See page 41 for Lamp mode.)Selected Input Source and Lamp ModeTurning On the ProjectorTurning Off the ProjectorNOTE The projector cannot be turned on during the cooling period with thePOWER indicator flashing red. You can turn it on again after the POWERindicator lights red. When the On start function is on, this projector is turned on automatically byconnecting the AC power cord to an AC outlet. (See page 41 for the Onstart function.) Do not use the projector for more than 24 hours continuously. Turn off theprojector at least once in 24 hours and give it a rest. Continuous use mayresult in shortening the lamp lifetime. This projector monitors internal temperature and automatically controls therunning speed of the cooling fans. If the WARNING indicator flashes or lights red, see “Warning Indicator” onpage 43.Complete peripheral connections (with a computer, VCR, etc.)before turning on the projector.Lamp mode
/ 60
Related manuals for Sanyo PLC-SC10
Sanyo PLC-SU60 Owner's Manual first page preview
Sanyo PLC-SU60 Owner's Manual
Sanyo PLC-XU60 Owner's Manual first page preview
Sanyo PLC-XU60 Owner's Manual
Sanyo PLC-XU60 Owner's Manual first page preview
Sanyo PLC-XU60 Owner's Manual
Sanyo PLC-SU25 Owner's Manual first page preview
Sanyo PLC-SU25 Owner's Manual
Sanyo PLC-SU33 Owner's Manual first page preview
Sanyo PLC-SU33 Owner's Manual
Sanyo PLC-SU50 Owner's Manual first page preview
Sanyo PLC-SU50 Owner's Manual
Sanyo PLC-SU51 Owner's Manual first page preview
Sanyo PLC-SU51 Owner's Manual
Sanyo PLC-SU31 Owner's Manual first page preview
Sanyo PLC-SU31 Owner's Manual
Sanyo PLC-SU30 Owner's Manual first page preview
Sanyo PLC-SU30 Owner's Manual
Sanyo PLC-SU30 Owner's Manual first page preview
Sanyo PLC-SU30 Owner's Manual
This manual is suitable for:
PLC-SC10PLC-SU60PLC-XC10PLC-XU60
Manuals database logo
manualsdatabase
Your AI-powered manual search engine