Sanyo PLC-SU60 Owner's Manual

Also see for PLC-SC10: Service manual

Contents

22Basic OperationPress the NO SHOW button on the remote control to black out theimage. To restore to normal, press the NO SHOW button again orpress any other button. When a projected image is captured and setas “User” in the Logo item in the Setting Menu (p40), the screenchanges each time you press the NO SHOW button as follows.The message disappears after 4 seconds.Press the P-TIMER button on the remote control. The timer display“00 : 00” appears on the screen and the timer starts to count time (00: 00 ~ 59 : 59).To stop the P-Timer, press the P-TIMER button. And then, press theP-TIMER button again to cancel the P-Timer function.12Press the MENU button and the On-Screen Menu will appear.Press the Point Left/Right button to move the red frame pointerto the Sound Menu icon.VolumePress the VOLUME (+/–) button on the top control or on the remotecontrol to adjust volume. The volume dialog box appears on thescreen for a few seconds.(+) button to turn up the volume and (–) button to turn down thevolume.MutePress the MUTE button on the remote control to cut off sound. Torestore sound to its previous level, press the MUTE button again orpress the VOLUME (+/–) button.Press the Point Right button to turn up the volume, and press thePoint Left button to turn down the volume.Press the Point Left/Right button to cut off sound. Dialog box displayis changed to “On” and sound is cut off. To restore sound to itsprevious level, press the Point Left/Right button again.Press the Point Down button to move the red frame pointer tothe item that you want to select, and then press the SELECTbutton. indicates approximatelevel of volume.closes the Sound Menu.Direct OperationVolumeMuteindicates approximatelevel of volume.Press the MUTE button to setthe Mute function On or Off.The display disappears after 4 seconds.Sound MenuSound Menu iconNo Show FunctionP-Timer FunctionSound AdjustmentMenu Operationblack out ➜ the captured image ➜ normal ➜ • • • • •