Sanyo PLC-WL2500A Owner's Manual
Also see for PLC-WL2500A: ManualManualQuick reference guideOwner's manualSpecifications
                                                                              | |
Contents
| 
27HDMIASPECTChoose Computer 1(RGB) by pressing the COMPUTER 1button on the remote control or press the INPUT button onthe top control.Before using these buttons, correct input source should beselected through Menu operation as described below.1Input Menu23Input Source Selection (Computer 1: RGB)Computer InputCOMPUTER 1 buttonNote:When the Input Search function is set to On 1 or On 2 inthe Auto setup function, the input signal will be searchedautomatically (p.45).Computer1Remote ControlPress the MENU button to display the On-ScreenMenu. Use the Point ▲ ▼ buttons to select Input andthen press the Point ► or the SELECT button.Use the Point ▲▼ buttons to select Computer 1.When Computer 1 is selected, press the Point ► toaccess the submenu items. Use the Point ▲▼ buttonsto select the RGB input source and then press theSELECT button.Computer 1(RGB)Computer 1(Scart)Direct OperationMenu OperationINPUT buttonTop Control*COMPUTER 2 can not be selected when using theCOMPUTER IN 2/ MONITOR OUT terminal as MONITOROUT output.Computer 1Computer 2 *HDMIVideoS-videoXGA1XGA1 |
Related manuals for Sanyo PLC-WL2500A
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine