Sanyo PLC-WL2501 Owner's Manual

Also see for PLC-WL2501: Manual Manual Command list Manual Manual

Contents

Sanyo PLC-WL2501 Owner's Manual Manual pdf 18 page image

18The preparation display will disappear after 15seconds.(See page 54 for Lamp control status.)Turning On the ProjectorConnect the projector’s AC power cord into an ACoutlet. The POWER indicator lights red.Press the ON/STAND-BY button on the remote control.The POWER indicator lights green and the coolingfans start to operate. The preparation display appearson the screen and the countdown starts.214 After the countdown, the input source that wasselected the last time and the lamp control status icon(see page 54) appear on the screen.Complete peripheral connections (with a computer,VCR, etc.) before turning on the projector.Selected Input Source and Lamp ControlNote:• When the Logo select function is set to Off, the logo willnot be shown on the screen. (p.47)• When Countdown off or Off is selected in the Displayfunction, the countdown will not be shown on the screen.(p.46)• During the countdown period, all operations are invalid.• When the Input search function is set to On 2, the inputsignal will be searched automatically. (p.45)• When Off is selected in the Display function, the Video/PC selection window and the input signal guidancewindow are not shown on the screen. (p.46)Note:The Filter warning and Lamp replacementicons may appear on the screen dependingon the usage state of the projector.Basic OperationVideoIf there is no signal input when start on the projector, orthe current signal is missed while operating the projector,the Video / PC selection window will be displayed onthe screen, please move the pointer to input sourcedesired by pressing the Point ▲▼ buttons and pressthe SELECT button. And then follow the input signalguidance window to correct the signal and connection.If the projector is locked with a PIN code, PIN code inputdialog box will appear. Enter the PIN code as instructedon the next page.5No signalCurrent Input setting:VideoIs signal processed correctly?Is cable connected properly?No signalCurrent Input setting:RGBIs signal processed correctly?Is cable connected properly?Video / PC selection windowVideo / PC selection windowInput signal guidance windowInput signal guidance windowLamp control status15