Sanyo PLC-WL2501 Owner's Manual

Also see for PLC-WL2501: Manual Manual Command list Manual Manual

Contents

Sanyo PLC-WL2501 Owner's Manual Manual pdf 35 page image

5StoreThis projector has the picture screen resize function, whichenables you to customize the image size.Screen MenuProvide the image to fit the screen size while maintainingthe aspect ratio of input signal.NormalTrueFullProvide the full screen image.12To store the adjusted data, select Store and press the Point► or the SELECT button. Use the Point ▲▼ buttons toselect one from Image 1 to 4 and press the SELECT button.A confirmation box appears and then select Yes. Storeddata can be called up by selecting an Image (1-4) in theImage Mode Selection on page 33.Press the MENU button to display the On-ScreenMenu. Use the Point ▲▼ buttons to select Screen andthen press the Point ► or the SELECT button.Use the Point ▲▼ buttons select the desired item andthen press the SELECT button .A confirmation box appears andthen select Yes.Computer InputNote:• This projector can not display any resolution higher than 1920 x 1200. If your computer’s resolution is higherthan that, lower the resolution before connecting to the projector.• The image data other than 1280 x 800 is modified to fit the screen size in initial mode.•True and Digital zoom +/- are not available when the 4:3 or 16:9 function is selected in the Screen aspect (p.50).•True, Full, and Digital zoom +/– can not be selected when 480i, 575i, 480p, or 575p is selected in the PCSystem Menu (p.29).Store MenuProvide the image in its original size. When the originalimage size is larger than the screen size (1280 x 800), theprojector automatically switches to the panning mode. Usethe Point ◄►▲▼ buttons to pan the image. When adjusted,the arrows turn red. When reached to the correction limit,the arrows disappear.Screen Size AdjustmentCustomProvide the last stored aspect screen image.