Sanyo PLC-WL2501 Owner's Manual

Also see for PLC-WL2501: Manual Manual Command list Manual Manual

Contents

Sanyo PLC-WL2501 Owner's Manual Manual pdf 23 page image

2Focus AdjustmentAuto setup function is provided to automatically executethe setting of Auto setup (includes Input search and AutoPC adj. functions) in the Setting Menu by just pressing theAUTO SET button on the remote control. Refer to page 45for the setting of the Auto setup function.Note:Fine sync, Total dots, Horizontal and Vertical positionof some computers can not be fully adjusted with the AutoPC adjustment function. When the image is not providedproperly with this operation, manual adjustments arerequired. (pp.31-32)Auto Setup FunctionBasic OperationPress the KEYSTONE button on the remote control. TheKeystone dialog box appears. Use the Point ▲▼ buttons tocorrect keystone distortion. The keystone adjustment can bestored (see page 46).Reduce the upper widthwith the Point ▲ button.Reduce the lower widthwith the Point ▼ button.• The white arrows indicate that there is no correction.• A red arrow indicates the direction of correction.• An arrow disappears at the maximum correction.• If you press the KEYSTONE button on the remotecontrol once more while the keystone dialog box isbeing displayed, the keystone adjustment will becanceled.• The adjustable range is limited depending on theinput signal.Keystone CorrectionRemote ControlHDMIASPECTAUTO SET buttonAdjust the lens focus with the focus lever. Focus LeverRemote ControlHDMIASPECTPOINT ▲▼ buttonsKEYSTONE button