Sanyo PLC-WL2503A Owner's Manual

Also see for PLC-WL2503A: Manual Manual Service manual Dimensional drawing Specifications

Sanyo PLC-WL2503A Owner's Manual Manual pdf 12 page image

1Chapter 2 Setup ProceduresSetting procedures and contents differ depending on the LAN installation location.When installing, consult your system administrator to set up the LAN appropriately.Connect the LAN cable to the LAN connection terminal of the projector.Network configurationSet the Wired LAN network through the projector menu. Detailed network settings will bemade with browser. Refer to “3. Basic setting and operation” (p.17-32). First, complete thesettings described in this chapter before performing steps in “3. Basic setting and opera-tion.”Connecting to the LAN lineLINK Lamp (Green)Light green when theprojector is connected tothe network correctly.ACT Lamp (Orange)Blink orange when theprojector is sending orreceiving the data.LAN CableLAN ConnectionTerminalSetting Procedure1. Select “LAN mode select” in the Network menu, and press Point 8 or SELECT button.2. Select similar LAN environment among LAN1, LAN2 and LAN3 with the Point ed but-tons and press SELECT button. Then the Menu will disappear, the “Please wait...” mes-sage will appear, and switching operation will start. Switching will take a while and theprojector’s LINK/ACT Lamp will be on or blink, and after completing the operation, the“Please wait...” message will disappear.