Sanyo PLC-WL2503A Owner's Manual

Also see for PLC-WL2503A: Manual Manual Service manual Dimensional drawing Specifications

Sanyo PLC-WL2503A Owner's Manual Manual pdf 30 page image

0Chapter 3 Basic Setting and OperationSNMP settingThis projector provides a SNMP (Simple Network Management Protocol)agent function. The SNMP consists of a manager and agents. The groupwhich communicates information each other with SNMP is called"Community". There are two access modes in a community, Refer (read only) and Set (read-write). This projector allows to use Refer (read only) only. The SNMP message informs the pro-jector status called "Trap" to an administrator. Click SNMP setting on the main menu and setup each item.Item DescriptionContact ...............................................Enter user name of the projector etc. (optional). (up to 114 characters)Place .....................................................Enter place of the projector (optional). (up to 116 characters)Community name(refer) .......Enter community name (read only). Default name is "public". (up to 115characters)PJ informationItem DescriptionCommunity name ......................Enter community name to send "Trap". Default name is "public". (up to64 characters)Trap address ...................................Enter IP address of the SNMP manager computer to receive "Trap".Trap