Sanyo PLC-WM5500/L - 5500 Lumens Manual

Also see for PLC-WM5500: Owner's manual Brochure Manual Owner's manual Command list

PLC-WM5500/WM5500L Basic Serial Command Functional Specifications16/286.27 INPUT 2 RGB CommandCommand “C25” [CR]DetailSelect RGB input in Input 2.Although projector returns “OK”, Input search is not executed with this commandwhile Input button is set to Mode2 or Mode3.Acceptable [ACK] [CR]ResponseUnacceptable “?” [CR]6.28 IMAGE CommandCommand “C27” [CR]Detail Switch Image Setting statusAcceptable [ACK] [CR]ResponseUnacceptable “?” [CR]6.29 Direct on SET CommandCommand “C28” [CR]DetailEnable Direct onThis status is stored in EEPROM and retained regardless of Power OFF/ONoperation.Acceptable [ACK] [CR]ResponseUnacceptable “?” [CR]6.30 Direct on CANCEL CommandCommand “C29” [CR]DetailDisable Direct onThis status is stored in EEPROM and retained regardless of Power OFF/ONoperation.Acceptable [ACK] [CR]ResponseUnacceptable “?” [CR]6.31 POWER MANAGEMENT READY CommandCommand “C2A” [CR]DetailSet Power Management function to ready statusThis status is stored in EEPROM and retained regardless of Power OFF/ONoperation.Acceptable [ACK] [CR]ResponseUnacceptable “?” [CR]6.32 POWER MANAGEMENT CANCEL CommandCommand “C2B” [CR]DetailSet Power Management function to off statusThis status is stored in EEPROM and retained regardless of Power OFF/ONoperation.Acceptable [ACK] [CR]ResponseUnacceptable “?” [CR]