Sanyo PLC-WM5500/L - 5500 Lumens Manual

Also see for PLC-WM5500: Owner's manual Brochure Manual Owner's manual Command list

PLC-WM5500/WM5500L Basic Serial Command Functional Specifications21/286.57 AUTO PC ADJ. CommandCommand “C89” [CR]DetailExecute AUTO PC ADJ. functionThis command works the same way as “AUTO PC” button of the remote control.Sending this command during Auto PC Adj. process terminates the operation.Acceptable [ACK] [CR]ResponseUnacceptable “?” [CR]6.58 PRESENTATION TIMER CommandCommand “C8A” [CR]Detail Start Timer for presentationThis command works the same way as “P-TIMER” button of the remote control.Acceptable [ACK] [CR]ResponseUnacceptable “?” [CR]6.59 PRESENTATION TIMER (Exit) CommandCommand “C8B” [CR]DetailExit P-Timer function.This command works the same way as pressing and hold “P-TIMER” button of theremote control.Acceptable [ACK] [CR]ResponseUnacceptable “?” [CR]6.60 KEYSTONE ↑ CommandCommand “C8E” [CR]DetailCorrect keystone distortion by reducing upper part of image. This commandinvokes both operations of keystone distortion correction and OSD display,regardless of whether the “KEYSTONE” OSD has been already displayed or not.Acceptable [ACK] [CR]ResponseUnacceptable “?” [CR]6.61 KEYSTONE ↓ CommandCommand “C8F” [CR]DetailCorrect keystone distortion by reducing lower part of image. This commandinvokes both operations of keystone distortion correction and OSD display,regardless of whether the “KEYSTONE” OSD has been already displayed or not.Acceptable [ACK] [CR]ResponseUnacceptable “?” [CR]