5 ENGLISHSystemThis function is to select the system of signalinput to the projector. The available systemmode are listed on the pull-down menu but-ton according to the input signal. Select asystem and then click Set button.Control✐ If the mode (Mode1 to Mode10) which is stored in the item "PC Adjustment" (+ p.38) is available,they are also listed together with the above mode.Available selection at the RGB(PC analog)inputItem DescriptionXGA1 ........................ It automatically switches to the proper computer sys-tem of the input signal.* The computer system modes (VGA, SVGA, XGA. SXGA,UXGA, WXGA...) which meet the input signal are listed.Available selection at the HDMI inputItem DescriptionD-XGA...................... It automatically switches to the proper computer sys-tem of the input signal.* The computer system modes (D-VGA, D-SVGA, D-XGA.D-SXGA1...) which meet the input signal are listed.D-480p .................... It automatically switches to the proper scanning systemof the input signal.* The selectable scanning systems are D-480p, D-575p,D-720p, D-1035i, D-1080i and D-1080p.Available selection at the Video/S-video/Scart inputItem DescriptionAUTO ........................ It automatically switches to the proper color system ofthe input signal.* The selectable color systems are PAL, SECAM, NTSC,NTSC4.43, PAL-M and PAL-N.* AUTO is fixed at the Scart input.Available selection at the Component inputItem DescriptionAUTO ........................ It automatically switches to the proper scanning systemof the input signal.* The selectable scanning systems are 480i, 575i, 480p,575p, 720p, 1035i, 1080i and 1080p.