Sanyo PLC-WM5500/L - 5500 Lumens Owner's Manual

Also see for PLC-WM5500: Owner's manual Brochure Manual Manual Command list

0Chapter 4 Controlling the ProjectorItem DescriptionFilter control ....... Scroll the filter. Click "Roll-up", a confir-mation display appears, and then click"OK", the filter will be scrolled.Fan speed control... Sets the running speed for the coolingfans. (Normal, Max)Remote control.... Selects the remote control code.(Code1 - Code8)Power management... Sets into the selected power manage-ment mode (OFF, Ready, Shutdown) ifthe input signal is interrupted and nocontrol key is pressed for the specifiedperiod of time.* The specified time can be set 1 to 30 min.Direct on................ Sets the power-on mode when the AC cord is connected to the outlet.PJ lock suspend... When the projector has a security of PIN code lock, disable this function temporarilyby pressing Execute button.Setting procedure1. Turn off the projector , disconnect AC cord from the outlet and then connect AC cord again.2. Access this page with the web browser.3. Click Execute button on the PJ lock suspend.Shutter .................... Sets the shutter operation. (ON: close, OFF: open)Shutter management ... Sets the specified period of time when the projector shuts down after the projectoris left with the shutter closed.* The specified time can be set 5 to 480 min.Item DescriptionInput button ....... Sets the input search mode by pressingthe INPUT button of the projector andthe remote control. (Mode1, Mode2,Mode3)Display .................... Switches on or off the on-screen menudisplay on the screen. (ON, Countdownoff, OFF)Countdown off ....... Displays input image instead thecountdown during the startup.Background......... Sets the screen background when nosignal input. (Blue, User, Black)Logo ......................... Sets on or off the logo display on thescreen during the startup. (User, Default, OFF)Picture in Picture ... Sets the Picture in Picture mode. (OFF, User1 - User5)HDMI setup ......... Sets the input signal from HDMI input.Image ............. Sets the Digital RGB image level of HDMI. (Normal, Enhanced)Sound ............. Sets the audio input when using HDMI. (HDMI, AUDIO1)Lamp control...... Selects lamp control mode. (Auto, Normal, Eco1, Eco2)Lamp life control ... Selects lamp life control mode (Mode1, Mode2) when the total use time exceedsthe recommended total hours of use.Setting 1Setting 2