Sanyo PLC-WM5500/L - 5500 Lumens Owner's Manual

Also see for PLC-WM5500: Owner's manual Brochure Manual Manual Command list

ENGLISHItem DescriptionContrast .............................. Adjusts picture con-trast. (0~ 63)Brightness ......................... Adjusts picture bright-ness. (0~ 63)Color ...................................... Adjusts picture colorsaturation. (0~ 63)Tint ......................................... Adjusts picture hue.(0~ 63)Color temp........................ Sets a color temperaturemode. (XLow, Low, Mid,High, Adj.)White BalanceRed, Green, Blue ..... Adjusts each whitebalance respectively.(0~ 63)* When changing the value of thewhite balance, the color temp.indicates "Adj."Sharpness ................................ Adjusts picturesharpness. (0~ 31)Gamma.......................................... Adjusts brightness of darker part of the picture. (0~ 15)Noise reduction ................Switches noise reduction mode (ON, OFF)Progressive ............................Switches progressive mode (ON, OFF, Film)Reset............................................Resets the Image adjustment to previous levels.Store ............................................ Stores the Image adjustment values. Select an item [Image1 - Image10]from the pull-down menu and click Store button.Load Image mode ............. Loads the Image mode. Select an image mode from the pull-down menuand click Load button. There may not be available mode depending on theinput mode as shown in the table left.Image adjustmentThis function is to adjust the projected picture image and save the image mode. To storethe adjusted value, click Store button, and to load the adjusted value, click Load button.Input sourceImage mode Video ComputerDynamic 4 4Standard 4 4Natural 4 *Cinema 4 *Real * 4Image1 - 10 4 4✐ The mark "4" means that the available image mode in theselected input source. The error message appears whenselecting the disabled image mode indicated with "*".Control