Sanyo PLC-WU3800 Manual

Also see for PLC-WU3800: Dimensional drawing Manual Command list Specification sheet Owner's manual

PLC-WU3800 Basic Serial Command Specifications11/246.5. POWER ON CommandCommand “C00” [CR]DetailPower ONWhen already Power is ON, nothing is done.When sending this command during processing Countdown, Countdown isterminated.ResponseAcceptable [ACK] [CR]Unacceptable “ ”[CR]6.6. POWER OFF Command Quick Power OFFCommand “C01” [CR]DetailPower OFF (Standby)When Power is OFF with ON/STAND-BY button of the projector and remotecontrol, “Power OFF?” is displayed. However, as soon as this command is sent,Quick Power OFF is executed.Response Acceptable [ACK] [CR]Unacceptable “ ”[CR]6.7. POWER OFF CommandCommand “C02” [CR]DetailPower OFF (Standby).The command operates the same Power OFF function as ON/STAND-BY buttonof the projector and remote control.Once this command is sent, “Power OFF?” is displayed. If this command is sentagain while it is displayed, Power OFF is executed.When sending this command during Countdown, Countdown is terminated.Response Acceptable [ACK] [CR]Unacceptable “ ”[CR]6.8. HDMI CommandCommand “C04” [CR]DetailSelect HDMI InputAlthough projector returns “OK”, Input search is not executed with this commandwhile Input search is set to On1/On2.ResponseAcceptable [ACK] [CR]Unacceptable “ ”[CR]6.9. Computer 1 CommandCommand “C05” [CR]DetailSelect Computer 1 InputAlthough projector returns “OK”, Input search is not executed with this commandwhile Input search is set to On1/On2..Response Acceptable [ACK] [CR]Unacceptable “ ”[CR]