Sanyo PLC WXU700A Owner's Manual

Contents

Sanyo PLC WXU700A Owner's Manual Manual pdf 25 page image

5Menu BarFor detailed functions of each menu, see “Menu Tree” on pages 73-74.Basic OperationMain Menu Sub-Menu Image selectFor computer source, used to select an image mode among Dynamic, Standard, Real, Blackboard(Green), Colorboardand image 1 - 4 (p.36).For HDMI or Video source, used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green) ,Colorboard and Image 1- 4 (p.43). Image adjustFor computer source, used to adjust computer image [Contrast, Brightness, Color temp , White balance (R/G/B),Sharpness and Gamma] (pp.37-38).For HDMI or Video source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color temp , Whitebalance (R/G/B), Sharpness, Gamma, Noise reduction and Progressive] (pp.44-45). PC adjustSelect Fine sync, Total dots, Horizontal, Vertical, Clamp, Display area H and Display area V to adjust theparameters to match with the PC input signal format (p.32-35). ScreenFor computer source, used to adjust size of the image [ Normal, True, Full, Custom and Digital zoom +/–] (pp.38-39).For HDMI or Video source, used to set size of image [Normal, Full, Zoom, Wide , Natural wide and Custom] (p.46). InputUsed to select an input source from Computer 1, Computer , HDMI, Video, S-video or Network (pp.30-31,40-41). SoundUsed to adjust the volume or mute the sound (p.27). InformationDisplay the input source information: Input , H-sync freq , V-sync freq , Screen, Language, Lamp status, Lampcounter, Power management, Key lock, PIN code lock and Remote control (p.63). GuideThe key operation is displayed. SettingUsed to set the projector’s operating configurations (pp.47-62). NetworkSee the owner’s manual of “Network Set-up and Operation”.