Sanyo PLC WXU700A Owner's Manual

Contents

Sanyo PLC WXU700A Owner's Manual Manual pdf 28 page image

8Basic OperationRemote Control OperationUsing the remote control for some frequently used operations is advisable. Just pressing one of the buttonsenables you to make the desired operation quickly without calling up the On-Screen Menu.Press the HDMI, COMPUTER, VIDEO or NETWORK buttonon the remote control to select the input source. See pages30-31, 40-41 for details.Refer to the owner’s manual of “Network Set-up andOperation” for details about the network input.HDMI/COMPUTER/VIDEO/NETWORK buttonPress the FREEZE button on the remote control to freezethe picture on the screen. To cancel the Freeze function,press the FREEZE button again or press any other button.Fig.1 will appear on the Screen menu while the Freezefunction is working.FREEZE buttonDisplay the input source information: Input, H-sync freq ,V-sync freq , Screen, Language, Lamp status, Lampcounter, Power management, Key lock, PIN code lockand Remote control (p.63).INFO buttonPress the D.ZOOM +/- buttons on the remote control toenter to the Digital zoom +/– mode. See page 39 for details.D ZOOM +/- buttonsRemote ControlFREEZE buttonD ZOOM+/-buttonsINFObuttonPOINT ▲▼buttonsLAMPbuttonNote:See the next page for the description of otherbuttons.LAMP buttonCOMPUTERbutton NETWORKbuttonVIDEO buttonHDMI buttonPIP buttonPress the PIP button on the remote control to enter P in Por P by P.Mode of Picture in Picture and input source will be displayedon the main picture and input source will be displayed on thesub picture for 10 seconds.See page 55 for details.PIP buttonPress the LAMP CONTROL button on the remote controlto select the lamp mode for changing the brightness on thescreen.Auto .......... The brightness according to the inputsignal (between High and Eco mode).High .......... Brighter than the Normal mode.Normal ...... Normal brightnessEco ............ Lower brightness reduces the lamp powerconsumption and extends the lamp life.Fig.1