Sanyo PLC-XC50 - 2600 Lumens Manual

Also see for PLC-XC50 - 2600 Lumens: Owner's manual Manual Specification sheet Owner's manual

PLC-XC50/55 Basic Serial Command Specifications17/256.40. Power Management OFF CommandCommand “C2B” [CR]Detail Set Power Management to OFF mode.This status is stored in EEPROM and retained regardless of Power ON/OFF.Response Acceptable [ACK] [CR]Unacceptable [CR]6.41. Power Management Shut down CommandCommand “C2E” [CR]Detail Set Power Management to Shut down mode.This status is stored in EEPROM and retained regardless of Power OFF/ON.Response Acceptable [ACK] [CR]Unacceptable [CR]6.42. D.ZOOM + CommandCommand “C30” [CR]Detail Enter Digital Zoom mode and expand image size.This command works the same as “D.ZOOM ” button of the remote control.ResponseAcceptable [ACK] [CR]Unacceptable [CR]6.43. D.ZOOM – CommandCommand “C31” [CR]Detail Enter Digital Zoom mode and reduce image size.This command works the same as “D.ZOOM ” button of the remote control.Response Acceptable [ACK] [CR]Unacceptable [CR]6.44. Video Auto CommandCommand “C32” [CR]DetailSelect Auto input in Video.Although Input search mode is On1/On2, the operation does not start with thiscommand.ResponseAcceptable [ACK] [CR]Unacceptable [CR]6.45. Video Video CommandCommand “C33” [CR]DetailSelect Video input in Video.Although Input search mode is On1/On2, the operation does not start with thiscommand.Response Acceptable [ACK] [CR]Unacceptable [CR]