Sanyo PLC-XC50 - 2600 Lumens Manual

Also see for PLC-XC50 - 2600 Lumens: Owner's manual Manual Specification sheet Owner's manual

PLC-XC50/55 Basic Serial Command Specifications18/256.46. Video S-Video CommandCommand “C34” [CR]DetailSelect S-Video input in Video.Although Input search mode is On1/On2, the operation does not start with thiscommand.ResponseAcceptable [ACK] [CR]Unacceptable [CR]6.47. Image Colorboard CommandCommand “C39” [CR]Detail Set image to Colorboard mode.Response Acceptable [ACK] [CR]Unacceptable [CR]6.48. POINTER RIGHT CommandCommand “C3A” [CR]DetailMove the Pointer of On-Screen Display Menu to the right.This command works differently from the pointer “>” of the projector, and has nofunction of Volume +.Response Acceptable [ACK] [CR]Unacceptable [CR]6.49. POINTER LEFT CommandCommand “C3B” [CR]DetailMove the Pointer of On-Screen Display Menu to the left.This command works differently from the pointer “<” of the projector, and has nofunction of Volume +.Response Acceptable [ACK] [CR]Unacceptable [CR]6.50. POINTER UP CommandCommand “C3C” [CR]Detail Move up the Pointer of On-Screen Display Menu.This command works the same way as the pointer “ ” of the projector.Response Acceptable [ACK] [CR]Unacceptable [CR]6.51. POINTER DOWN CommandCommand “C3D” [CR]Detail Move down the Pointer of On-Screen Display Menu.This command works the same as the pointer “ ” of the projector.Response Acceptable [ACK] [CR]Unacceptable [CR]