-13-z Cabinet Top, Lamp Cover, Filter Cover and Lens Cover removalMechanical DisassemblyMechanical disassembly should be made following procedures in numerical or-der.Following steps show the basic procedures, therefore unnecessary step maybe ignored.Caution:The parts and screws should be placed exactly the same position as the originalotherwise it may cause loss of performance and product safety.Screws Expression(Type Diameter x Length ) mmT type M TypeHolder of Front GlassFig.1Cabinet topA(M3x8)x81. Remove 8 screws A (M3X8) to remove the Cabinet Top.2. Loosen Screw B (M3X7) to remove the Lamp Cover.3. Loosen 2 Screws B (M3X7) to remove the Filter Cover.4. Remove the Control Buttons.5. Remove the Front Glass and the Front Ring.6. Remove 2 Screws C (T3X6) to remove the Holder of Front Glass. Remove 2 Screws D(T3X6) to remove the Holder of Lens Shutter.Control ButtonsAB(M3x7)x2B(M3x7)x1D(T3x6)x2AAAAAAC(T3x6)x2Front RingHolder of LensShutterLamp CoverFilter CoverFront GlassLens ShutterCDTurn the Front Ring anticlockwise andremove the Front Glass.
