Sanyo PLC-XD2200 Owner's Manual

Also see for PLC-XD2200: Easy setup Manual Manual Command list Dimensional drawing

Contents

22Computer 1 RGBComputer 2 RGBVideo►ƘƘƘMenu BarFor detailed functions of each menu, see “Menu Tree” on pages 68-69.Basic Operation①②③④⑤⑥⑦⑧Main Menu Sub-Menu⑨⑩③ Image selectFor computer source, used to select an image mode from among Dynamic, Standard, Real, Blackboard(Green),Colorboard and image 1 - 4 (p.32).For Video source, used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green), Colorboardand Image 1- 4 (p.39).④ Image adjustFor computer source, used to adjust computer image [Contrast, Brightness, Color temp , white balance (R/G/B),Sharpness and Gamma] (pp.33-34).For Video source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color temp , white balance (R/G/B), Sharpness, Gamma, Noise reduction and Progressive] (pp.40-41).② PC adjustSelect Auto PC adj , Fine sync, Total dots, Horizontal, Vertical, Current mode, Clamp, Display area-H and Displayarea-V to adjust the parameters to match with the PC input signal format (pp.29-31).⑤ ScreenFor computer source, used to adjust size of the image [ Normal, True, wide, Full, Custom, Custom adj. and Digitalzoom +/– ] (pp.34-35).For Video source, used to set size of image [Normal, wide, Custom and Custom adj.] (p.42).① InputUsed to select an input source from Computer 1, Computer 2 or Video (pp.27, 36-37).⑥ SoundUsed to adjust the volume or mute the sound (p.24).⑧ InformationDisplay the input source information: Input , H-sync freq , V-sync freq , Screen, Language, Lamp status, Lampcounter , Power management, Key lock, PIN code lock and Remote control (p.58).⑩ GuideThe key operation is displayed.⑦ SettingUsed to set the projector’s operating configurations (pp.43-57).⑨ NetworkSee the owner’s manual of “Network Set-up and Operation”.