Sanyo PLC-XD2200 Owner's Manual

Also see for PLC-XD2200: Easy setup Manual Manual Command list Dimensional drawing

Contents

42Video InputThis projector has the picture screen resize function, which enables you to customize the image size.NormalScreen Size AdjustmentScreen Menu12Provide the image to fit the screen size while maintainingthe aspect ratio of the input signal.Custom adj✔Note:• When no signal is detected, Normal is setautomatically.• The adjustable range for Scale H/V andPosition H/V is limited depending on theinput signal.• wide cannot be operated when 720p,105i or 1080i is selected in the AVSystem Menu (p.38).wideModify the 4:3 aspect ratio image to fit the screen size (16:9aspect ratio) by streching the image.Press the MENU button to display the On-ScreenMenu. Use the Point ▲▼ buttons to select Screen andthen press the Point ► or the SELECT button.Use the Point ▲▼ buttons select the desired item andthen press the SELECT button.►►►Adjust the screen scale and position manually with thisfunction.Press the Point ► button at Custom adj and the Customadjustment menu is displayed on the screen, you can usethe Point ▲▼ buttons to choose the item you want to adjust.Scale H/V .......... Adjust the Horizontal/Vertical screenscale.H&V ................... When set to On, the aspect ratio isfixed. The Scale V appears dimmed andbecomes unavailable. Adjust Scale H,then the screen scale is automaticallymodified based on the aspect ratio.Position H/V ..... Adjust the Horizontal/Vertical screenposition.Common ........... Save the adjusted scale or position to allthe inputs. Press the SELECT button atCommon to display a confirmation box.To save the scale or position, press theSELECT button at yes. When Customis selected, the saved scale or position isused.Reset ................. Reset the all adjusted values. Pressthe SELECT button at Reset to displaya confirmation box. To reset, press theSELECT button at yes.CustomProvide the last stored aspect screen image.