Sanyo PLC-XE34 Owner's Manual

Also see for PLC-XE34: Owner's manual Owner's manual

Contents

31Computer InputStoreTo store the adjusted data, select Store and then press thePoint ► or the SELECT button. Move the highlight to oneof the Modes 1 to 10 in which you want to store, and thenpress the SELECT button.Mode freeTo clear the stored data, select Mode free and then pressthe Point ► or the SELECT button. Move the highlight to theMode that you want to clear and then press the SELECTbutton.✔Note:• Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 70p, 1035i or 1080i is selected in thePC System Menu (p.28).• When input computer signal to the projector, PC adjust will become available.ResetTo reset the adjusted data, select Reset and press theSELECT button. A confirmation box appears and then selectyes. All adjustments will return to their previous figures.This Mode has storedparameters.Auto PC adj.Fine syncTotal dots 1365Horiznotal 0Vertical 0Current modeClamp 0Display area H 1024Display area V 768ResetMode freeStore0 ►►Mode 1Mode 2Mode 3Mode 4Mode 5Mode 6Mode 7Mode 8Mode 9Mode 1000Total dots 1344Horizontal 255Vertical 34Display area H 1024Display area V 768Where to free?►Values of Total dots, Horizontal,Vertical, Display area H, andDisplay area V.store?StoreTotal dotsPosition HPosition VDisplay area HDisplay area V00Mode 1Mode 2Mode 3Mode 4Mode 5Mode 6Mode 7Mode 8Mode 9Mode 10Free00Total dots 1344Horizontal 255Vertical 34Display area H 1024Display area V 768Where to store?►VacantPress SELECT button tostore the data.Press MENU buttonto close this dialogbox.Mode freeStore