Sanyo PLC-XE34 Owner's Manual

Also see for PLC-XE34: Owner's manual Owner's manual

Contents

55SettingUse the Point ▲▼ buttons to select Off, On1 or On,and then press the SELECT button to make a choice.Change the PIN code lock settingEnter a PIN codeUse the Point ▲▼ buttons to enter a number. Press thePoint ◄ ► buttons to fix the number and move the redframe pointer to the next box. The number changes to✳. If you fixed an incorrect number, use the Point ◄ ►buttons to move the pointer to the number you want tocorrect, and then enter the correct number.Repeat this step to complete entering a four-digitnumber.After entering the four-digit number, move the pointer toSet. Press the SELECT button so that you can changethe following PIN code lock setting.If you entered an incorrect PIN code, PIN code and thenumber (✳✳✳✳) will turn red for a moment. Enter thecorrect PIN code all over again.Enter a PIN codeChange the PIN codeChange the PIN codeCAUTION:wHEN yOU HAVE CHANGED THE PIN CODE, wRITEDOwN THE NEw PIN CODE IN COLUMN OF THEPIN CODE NO MEMO ON PAGE 76, AND KEEP ITSECURELy IF yOU FORGET yOUR PIN CODE, THEPROjECTOR CAN NO LONGER BE STARTEDThe PIN code can be changed to your desired four-digitnumber. Press the SELECT button to select PIN codechange. Pin code dialog box appears, use the Point ▲▼buttons to enter the correct code. The New PIN codeinput dialog box appears. Set a new PIN code.Current PIN code