Sanyo PLC-XE34 Owner's Manual

Also see for PLC-XE34: Owner's manual Owner's manual

Contents

33Computer InputImage Adjust MenuImage AdjustmentResetPress the MENU button to display the On-ScreenMenu. Use the Point ▲▼ buttons to select Imageadjust and then press the Point ►or the SELECTbutton.1 Use the Point ▲▼ buttons select the desired itemand then press the SELECT button to display theadjustment dialog box. Use the Point ◄► buttons toadjust the setting value.✔Note:• When White balance Red, Green or Blue isadjusted, Color temp will change to User.• When Blackboard(Green) or Colorboardis selected in Image select, Color temp willchange to Blackboard or Colorboard.Press the Point ◄ button to decrease the contrast; press thePoint ►button to increase the contrast (from 0 to 63).Press the Point ◄ button to decrease the brightness; pressthe Point ►button to increase the brightness (from 0 to 63).ContrastBrightnessPress the Point◄ button to lighten red tone; press the Point► button to deepen red tone (from 0 to 63).white balance (Red)Press the Point ◄ button to lighten green tone; press thePoint ► button to deepen green tone (from 0 to 63).white balance (Green)Press the Point ◄ button to lighten blue tone; press thePoint ► button to deepen blue tone (from 0 to 63).white balance (Blue)Use the Point ◄► buttons to select the desired Color temp.level (XLow, Low, Mid, or High).Color tempUse the Point ◄► buttons to adjust the gamma value toobtain a better balance of contrast (from 0 to 15).GammaPress the Point ◄ button to decrease the sharpness of theimage; press the Point ► button to increase the sharpnessof the image (from 0 to 15).SharpnessTo reset the adjusted data, select Reset and press theSELECT button. A confirmation box appears and then selectyes. All adjustments will return to their previous figures.Use the Point ◄►buttons to adjust thesetting value.Selected Image mode