Sanyo PLC-XF30 Service Manual
Also see for PLC-XF30: SpecificationsOwner's manualSchematic diagramOwner's manual
                                                                                        | |
-45-Shade Integrator-lens-in adjustment-1 Integrator-lens-out adjustmentBefore Adjustment :* Remove the flexible cables of LCD panels fromthe assembly Main. And turn on the projector.* Shift the adjustment position of Integrator-lens-out temporarily until shade appears the right orthe left on the screen. After the Integrator-lens-in-1 adjustment, readjust the Integrator-lens-out.* Refer to "Integrator-lens-out adjustment" of nextstep for the adjustment method.Adjustment :1. Insert light block sheets in front of the Red and Bluepanels to block the red and blue lights so that greenlight is projected.2. loosen 2 screws A.3. Insert slot screwdriver into slot B, turn it until the shadeedge is sharp focus.4. Tighten the 2 screws A to fix the integrator-lens-in unit.Before Adjustment :1. Remove the flexible cables of LCD panels from theassembly Main. And turn on the projector.2. Insert light block sheets in front of the Red and Bluepanels to block the red and blue lights so that greenlight is projected.3. If the shade appears on the left or right of the screen,adjust in the following procedure.Adjustment :1. Loosen three screws-B.2. Insert a slot screwdriver into slot-A, turn it and eraseshade.3. Tighten the three screws B to fix the integrator lens-out unit.SCREW-ASCREW-ASLOT-BSCREW-BSCREW-BBOTTOMSIDESCREW-BSLOT-A |
Related manuals for Sanyo PLC-XF30
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine