Sanyo PLC-XK3010 Owner's Manual

Also see for PLC-XK2200: Owner's manual User manual Manual Manual Command list

Chapter 3 Basic Setting and Operation2 Registering and deleting E-mail addressesEnter the e-mail address onto "Add e-mailaddress" and click Set button.To check the registered addresses, clickCheck/Delete sub menu tab. The address-es are listed as the figure on the right.✐ Up to 10 E-mail addresses can be registered.To delete the registered addresses, check theaddress you want to delete and click Deletebutton.Check / Delete✐ If the projector sends an alert message due to the abnormality on the projector but the SMTPserver is down in some other reason, the message will not be sent. In this case, the message"Unable to connect to server." will be displayed on the setting page. To clear this message, set upSMTP server address again.✐ To use the E-Mail function, it must be set the DNS address on the Network setting page correctly.✐ You cannot use this E-mail function if the DNS server and SMTP server cannot be used in your net-work environment.✐ The projector does not send message to the address set in "Administrator address" text box. Ifyou want to send e-mails to the administrator address, enter the administrator address into "Addaddress" text box.1 Setting SMTP server and administrator addressEnter the server name or IP address of theSMTP server*1, the port number of theSMTP server and administrator address andclick Set button. The administrator addressis set to "Reply-To" address of the messagesent from the projector.*1 The SMTP server is a server for sending e-mail. Please contact your network administrator tohave this SMTP server address.