Sanyo PLC-XK3010 Owner's Manual

Also see for PLC-XK2200: Owner's manual User manual Manual Manual Command list

ENGLISHAbout projector conditionStatus DescriptionNormal ............................................................... Projector is operating normally.Power management in operation ........... Power management is operatingLamp failure ................................................... Lamp failure is occurringAbnormal Temperature ......................... The temperature of the projector became too highStandby after Abnormal Temp. ........ Projector detects abnormal temp. and sets into standby mode.Power failure ................................................ Power failure has occurred inside the projector. Projector is turnedoff. Unplug the AC cord and ask servicing to a qualified servicepersonnel.Power control and status checkWhen a security (PIN code lock) has been set on the projector, you also cannotcontrol it through the network. To control the projector through the network,unlock the security on the projector using with the projector's menu control.Caution about turning on/off the projector via the networksWhen turning on/off the projector via the networks, preset the projector as fol-lows:1. Select “Setting” from the Projector menu.2. Select “Standby mode” from the Setting menu and set it as “Network”.If you set this function as "Network", the network part of the projector is con-stantly provided with power even if the projector is turned off. If you set this asEco, then the network part will be turned off when you turn off the projector.Consequently, you cannot turn on/off the projector via the networks.