-14-Optical Parts DisassemblyBefore taking this procedure, remove Cabinet Top , Cabinet Front and Main Board following to the “MechanicalDisassembly”.Disassembly requires a .0mm hex wrench.Fig.1z Projection lens removalx Integrator lens-in disassemblyHooksIntegrator lens-inIntegrator Lens-In Ass'y(M3x8)x4(M.5x5)xFig.2Projection lens* Rugged surface(Behind)Note on replaceing the Projection Lens- When the Projection Lens is replaced with the newone, make sure that the fixing tape must be removedas the figuer.Fixing tape
