Sanyo PLC-XM100/L - 5000 Lumens Manual

Also see for PLC-XM100: Specification sheet Specifications Specifications Network manual Brochure

PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications16/286.25 INPUT 2 VIDEO CommandCommand “C23” [CR]DetailSelect Video input in Input 2.Although projector returns “OK”, Input search is not executed with this commandwhile Input button is set to Mode2 or Mode3.Acceptable [ACK] [CR]ResponseUnacceptable “?” [CR]6.26 INPUT 2 Y,Pb/Cb,Pr/Cr CommandCommand “C24” [CR]DetailSelect Y,Pb/Cb,Pr/Cr input in Input 2.Although projector returns “OK”, Input search is not executed with this commandwhile Input button is set to Mode2 or Mode3.Acceptable [ACK] [CR]ResponseUnacceptable “?” [CR]6.27 INPUT 2 RGB CommandCommand “C25” [CR]DetailSelect RGB input in Input 2.Although projector returns “OK”, Input search is not executed with this commandwhile Input button is set to Mode2 or Mode3.Acceptable [ACK] [CR]ResponseUnacceptable “?” [CR]6.28 IMAGE CommandCommand “C27” [CR]Detail Switch Image Setting statusAcceptable [ACK] [CR]ResponseUnacceptable “?” [CR]6.29 ON START SET CommandCommand “C28” [CR]DetailEnable Power ON StartThis status is stored in EEPROM and retained regardless of Power OFF/ONoperation.Acceptable [ACK] [CR]ResponseUnacceptable “?” [CR]6.30 ON START CANCEL CommandCommand “C29” [CR]DetailDisable Power ON StartThis status is stored in EEPROM and retained regardless of Power OFF/ONoperation.Acceptable [ACK] [CR]ResponseUnacceptable “?” [CR]