Sanyo PLC-XM100/L - 5000 Lumens Manual

Also see for PLC-XM100: Specification sheet Specifications Specifications Network manual Brochure

PLC-XM100/XM100L/XM150/XM150L Basic Serial Command Functional Specifications22/286.60 PRESENTATION TIMER (Exit) CommandCommand “C8B” [CR]DetailExit P-Timer function.This command works the same way as pressing and hold“P-TIMER” button of the remote control.Acceptable [ACK] [CR]ResponseUnacceptable “?” [CR]6.61 KEYSTONE ↑ CommandCommand “C8E” [CR]DetailCorrect keystone distortion by reducing upper part of image. This commandinvokes both operations of keystone distortion correction and OSD display,regardless of whether the “KEYSTONE” OSD has been already displayed or not.Acceptable [ACK] [CR]ResponseUnacceptable “?” [CR]6.62 KEYSTONE ↓ CommandCommand “C8F” [CR]DetailCorrect keystone distortion by reducing lower part of image. This commandinvokes both operations of keystone distortion correction and OSD display,regardless of whether the “KEYSTONE” OSD has been already displayed or not.Acceptable [ACK] [CR]ResponseUnacceptable “?” [CR]6.63 KEYSTONE → CommandCommand “C90” [CR]DetailCorrect keystone distortion by reducing right side of image. This commandinvokes both operations of keystone distortion correction and OSD display,regardless of whether the “KEYSTONE” OSD has been already displayed or not.Acceptable [ACK] [CR]ResponseUnacceptable “?” [CR]6.64 KEYSTONE ← CommandCommand “C91” [CR]DetailCorrect keystone distortion by reducing left side of image. This commandinvokes both operations of keystone distortion correction and OSD display,regardless of whether the “KEYSTONE” OSD has been already displayed or not.Acceptable [ACK] [CR]ResponseUnacceptable “?” [CR]