ENGLISHSNMP settingThis projector provides a SNMP (Simple Network Management Protocol)agent function. The SNMP consists of a manager and agents. The groupwhich communicates information each other with SNMP is called"Community". There are two access modes in a community, Refer (read only) and Set (read-write). This projector allows to use Refer (read only) only. The SNMP message informs the pro-jector status called "Trap" to an administrator. Click SNMP Setting on the main menu andset up each item.Item ........................................ DescriptionContact ...............................................Enter user name of the projector etc. (optional)Place .....................................................Enter place of the projector (optional)Community name(refer) .......Enter community name (read only). Default name is "public".PJ informationSNMP settingItem ........................................ DescriptionCommunity name ......................Enter community name to send "Trap". Default name is "public".Add address ....................................Enter IP address of the SNMP manager computer to receive "Trap".Trap