-15-Using the Lens Antitheft screwThis projector provides a Lens antitheft screw to protect the projection lens stolen from a suspicious person.Mount the Lens antitheft screw by following the instructions below.Loosen a screw-A on the lamp cover and slide it toopen (Fig. 1).Loosen a screw-B on the prism cover and slide it inthe arrow direction (Fig. ).Insert the Lens antitheft screw onto the screw holeon the cabinet top and turn it until the lens releasebutton is locked (Fig. 3).Close the prism cover and tighten the screw-B, andclose the lamp cover and tighten the screw-A.Check that the lens release button is locked to pro-tect the projection lens removing.1Mounting the Lens antitheft screw2Fig. 3Lens Antitheftscrew34Note: Be careful not to drop the Lens Antitheft screwinto the opening of the projector when mountingthe screw.MaintenancePrism coverBALamp coverFig. 1Fig. 2Lens release button
