Sanyo PLC-XM80 Owner's Manual

5SettingOffLogo selectCaptureCaptureThis function enables you to capture an image being projected touse it for a starting-up display or interval of presentations.Select Capture and press the SELECT button.A confirmation box appears and select yes to capture the projectedimage.After capturing the projected image, go to the Logo select functionand set it to User. Then the captured image will be displayed thenext time you turn on the projector.To cancel the capture function, select yes in the "Quit?" confirmationbox.PNote:• Before capturing an image, select Standard in the Image SelectMenu to capture a proper image (pp.40, 46).• A signal from a computer can be captured up to XGA (1024 x768). A signal from video equipment can be captured except for720p, 1035i, 1080i and 1080p.• When capturing the image that has been adjusted by theKeystone function, the adjusted data is automatically reset andthe projector captures an image without keystone correction.• When Logo PIN code lock is set to On, Capture cannot beselected.• When starting to capture a new image, the previously storedimage is cleared even if you cancel the capturing.• When there is no captured image or it is interrupted whilecapturing an image, User cannot be selected, you can onlyswitch between Default and Off.OffLogo selectLogo PIN code lockThis function prevents an unauthorized person from changing thescreen logo.Off ............. The screen logo can be changed freely from theLogo Menu (p.52).On ............. The screen logo cannot be changed without a LogoPIN code.If you want to change the Logo PIN code lock setting, press theSELECT button and the Logo PIN code dialog box appears. Entera Logo PIN code by following the steps below. The initial Logo PINcode is set to "4321" at the factory.Logo PIN code lock